Neuron-Spectrum-3

19-channel Clinical Diagnostic EEG System

Main Features:

• high sampling rate of 500 Hz and low noise level
• impedance indication on the front panel and in NeuroGuide
• standard 25 pin electrode cap connector
• operates in unshielded room
• portable digital EEG and EP system

The high sampling rate (up to 5000 Hz) allows to record the high-frequency signal components without “smoothing” of EEG sharp wave events or drops in EEG amplitude. The low noise level allows to apply the most sparing EEG filtration or avoid the filtration at all that saves useful information in native signal. 

Neuron-Spectrum-3 and computer are often placed in different rooms or even at quite long distance from each other. Neuron-Spectrum-3 has LED indicators that allow to observe the signal quality during the electrode placement at the spot. You can also check impedance values inside of NeuroGuide!

Neuron-Spectrum-3 is equipped with the standard electrode cap connector. Thus the use of adapters or other facilities to attach the cap is not required. 

 Neuron-Spectrum-3 can be used in any unshielded room. This increases the personnel convenience and patient’s comfort while decreasing the expenses for system installation. 

 Neuron-Spectrum-3 can be easily used on-location. The device is powered via USB cable and this cable is also used to transfer data to computer. So it can be powered by notebook battery. Thus you can organize EEG study in any place.